Liquid Rust Remover Engineer ZC-28, since it is a neutral liquid, you can work safely (it does not contain acid or alkali), less harmful to bare skin.
Rust on small components, such as rusted screws, can be removed only in seconds.
Quick result, No need to scrub!
How it works on rusted screws
Rapid Action - It instantly reacts on rust and turns purple!
Penetration - The liquid penetrates through small gaps and reaches the screw threads in aprox 5 seconds!
Screw Removal - Utilize Screw Removal Pliers to loosen the derusted screw with sure-gripping jaws.
How to use?
Apply enough liquid to the rusted screw.
It immediately reacts with the rust and turns purple.
Remove the screw after sufficient penetration.
Rinse it in water after rust removal. Then, be sure to apply anti-rust agent without fail.
Be aware of stains and tarnish on the metal parts around the screw.
Nota: A better performance of the rust remover can be achieved by heating the liquid. However, overheating should be avoided.
Wear protective equipment (eyeglasses, gloves, etc.) while working to avoid contact with eyes and skin.
Wash your hands after use, and gargle with clean water.
Keep out of reach of children.
Store in a cool and dry place, out of direct sunlight.
NB: This product has a peculiar smell.
Works with Red, Brown & Yellow colored rust on Iron, Copper, Stainless Steel, Brass, etc.
This product is not suitable for white-colored rust (aluminum etc.), black-colored rust (iron oxide) or green-colored heavy rust (verdigris).
Do not inhale or drink.
Do not mix with other chemicals. It may generate oxygen when it is mixed with oxidants.
In case of eye contact, immediately flush the eye with clean water for at least 15 minutes. Seek medical attention.
If swallowed, drink plenty of water and seek medical attention.
If inhaled, immediately move to a place of fresh air and rest. Seek medical attention if you feel unwell.
In case of skin contact, immediately rinse thoroughly with clean running water