Summer schedule: Monday – Friday: 9.00 – 16.00 - Displayed products are delivered from stock. Offers are valid within the limit of available stock.
EN 
Romana
Engineer Connector Extractor
Most popular
Rennsteig Automatic Center Punch 4 mm Adjustable Force 430230
Rennsteig Center Punch 5 mm Precision Drill Point Marking 4321200
Display: 1-16 from 16 products
Filters
Rennsteig Automatic Center Punch 4 mm Adjustable Force 430230
Rennsteig Center Punch 5 mm Precision Drill Point Marking 4321200
Rennsteig ULTIMAX Heavy Duty Demolition Bar Professional 2756002
Engineer Connector Extractor
ENGINEER extractors for connector pins and terminals
The pins inside a connector are held by a springy tab in the housing. To remove a contact without breaking the wire or destroying the housing, you need a thin sleeve that slides over the pin and presses the tab. That is exactly what the ENGINEER extractors do. The category is part of the hand tools section at Sanco Grup.There are 10 ENGINEER extractors, all stainless steel, in two series and five sizes each, plus Rennsteig tools listed in the same category.
Models available
SS series, 64 mm
Simple extractors for pins, terminals and connectors, with a total length of 64 mm: SS-30 (Ø inner 1.9 mm, outer 2.5 mm), SS-31 (2.1 / 2.7 mm), SS-32 (2.4 / 2.9 mm), SS-34 (2.7 / 3.2 mm) and SS-33 (3.1 / 3.6 mm).PAS series, 62 mm, with internal spring
The professional version, with an internal spring that automatically returns the sleeve to position after each extraction, and a coloured ring for quick size recognition: PAS-30 (Ø inner 1.9 mm, outer 2.5 mm), PAS-31 (2.1 / 2.7 mm), PAS-32 (2.4 / 2.9 mm), PAS-34 (2.7 / 3.2 mm) and PAS-33 (3.1 / 3.6 mm). Total length 62 mm.Professional Rennsteig tools (listed in the category)
The category also lists Rennsteig tools of German quality: the 430230 automatic center punch, the 4321200 and 4301200 center punches, the 1400100 hollow punch and the 2714002 and ULTIMAX 2756002 demolition bars. See also the screw extractors and accessories.How to choose the size
Choose by the pin, not the connector
The inner diameter of the sleeve must be slightly larger than the pin, and the outer diameter must fit into the cavity in the housing. That is why each model specifies both values.The five sizes covered
Inner Ø of 1.9 mm, 2.1 mm, 2.4 mm, 2.7 mm and 3.1 mm, with corresponding outer diameters between 2.5 mm and 3.6 mm.Plain or spring-loaded series
The SS series is enough for occasional work. The PAS series, with an internal spring and coloured ring, is for those who do this often and want automatic return and quick size identification.If you work on several connector types
Several sizes are worth having: an extractor that is too large deforms the cavity, and one that is too small does not press the locking tab.Main features
Thin, rigid tip
Reaches into confined spaces and releases the contact without bending the pin or breaking the wire.Stainless steel
Resistant to corrosion and to the wear caused by repeated insertion into housings.Internal spring, on the PAS series
Returns the sleeve to working position after each extraction, which shortens the time on repeated operations.Coloured identification ring
On the PAS series, it allows the size to be picked quickly from a set, without reading the marking.Compact format
62 and 64 mm, easy to carry in a service kit or in a work jacket pocket.Wide compatibility
Suitable for the usual connector types in electronics, automotive, telecommunications and industrial equipment.Recommended applications
Automotive wiring
Reconfiguring or repairing connectors in vehicle electrical systems, without replacing the whole harness.Electronics service
Troubleshooting boards and devices, where a contact needs to be moved or replaced. See also the electronics hand tools.Telecommunications and industrial equipment
Work on modular connectors, in installations and production lines.Prototyping and DIY projects
Modifying harnesses with modular connectors, without re-crimping the contacts. See also the crimping pliers.Benefits
- Remove the contact without breaking the wire or housing
- Five sizes, from Ø 1.9 mm to Ø 3.1 mm
- Thin tip, access in confined spaces
- Stainless steel, corrosion resistant
- Spring-loaded series, for repeated work
- Coloured ring, quick size identification
- Made by ENGINEER, available from stock
Related categories
See also the screw extractors and accessories, the integrated circuit extractor, the tweezers, the long nose pliers for electronics and the crimping pliers.The Engineer connector extractor category from Sanco Grup includes 10 ENGINEER stainless steel extractors, for removing pins and terminals from connector housings without damaging the wires or contacts, plus Rennsteig tools listed across categories. The range is organized in two series: the SS series, 64 mm, with the models SS-30 (Ø inner 1.9 mm, outer 2.5 mm), SS-31 (2.1 / 2.7 mm), SS-32 (2.4 / 2.9 mm), SS-34 (2.7 / 3.2 mm) and SS-33 (3.1 / 3.6 mm), and the professional PAS series, 62 mm, with an internal spring and a coloured identification ring, in the same five sizes: PAS-30, PAS-31, PAS-32, PAS-34 and PAS-33. They suit automotive wiring, electronics service, telecommunications, industrial equipment and prototyping projects.
Frequently asked questions
What is a connector extractor used for?
For removing pins and terminals from a connector housing, without breaking the wire or damaging the contact.How does it work?
The thin sleeve is slipped over the pin and presses the springy tab in the housing that locks the contact; the contact can then be pulled out.What sizes are available?
Five inner diameter sizes: 1.9 mm, 2.1 mm, 2.4 mm, 2.7 mm and 3.1 mm.How do I choose the right size?
By the pin diameter, not the connector: the inner diameter must pass over the pin, and the outer one must fit into the cavity in the housing.FAQ
What is the difference between the SS and PAS series?
The PAS series has an internal spring, which returns the sleeve automatically, and a coloured ring for quick size identification.
What material are they made from?
Stainless steel, resistant to corrosion and repeated use.
Are they available from stock?
Yes, all 10 ENGINEER extractors are in stock.
