Rapid Professional Glue PVC, Cable and Plastics, fix and repair, clear, Ø12mm x 190mm, EVA basis, 48 pcs/blister 5001413

Rapid Professional Glue PVC, Cable and Plastics after heating and melting in a soldering gun ensures a quality soldering due to the high level of EVA resin. Find out what EVA means! click here!

The low viscosity of the molten adhesive allows a high flow rate which leads to increased productivity.

Open time on universal silicone bonding - the time in which it is possible to act on the adhesive and change a little the position of the glued materials.
Set time - the time required for drying and hardening of the solder.
 
For light duty to medium duty applications such as gluing cables of a new electronic device, bonding broken pieces of a toy together or repairing anything made of plastics or PVC. The glue works perfectly on glass, plexiglass and on rubber. Also good for applications where clear glue is needed.

Unlimited in standard ambient conditions: 15°C to 35°C. Store away from heat. Store in dry, dust free, and well ventilated environment. Keep in cool and dark area.

Specifications:
 

• Ø12 mm
• Long sticks (190 mm) for high efficiency, less reloading.
• High levels of resin EVA    
• Color: clear
• Application temperature: 170°C - 190°C according to the type of applicator and used materials
• Melting point: 80°C - 96°C
• Open time: 30 sec
• Set time: 30 sec
• The sum of the two parameters is total time required for a solder to become 100% final.

Packaging: 190 mm silicone sticks, 48 sticks/blister

Packed in short and long PET blisters of 14/48 pcs each:

•    Short sticks for easier switch to different speciality glues and better handling.
•    Long sticks for higher efficiency, less reloading.

Use with Rapid glue guns EG111, EG212, EG250, CG270, BGX300, G1000, Hobby Glue Gun

Characteristics:
 

• Diameter: 12 mm
• Stick length: 190 mm
• Adhesive type: PVC, Cable and Plastics
• Color: clear
• High EVA content: YES
• Weight: 850 g