Summer schedule: Monday – Friday: 9.00 – 16.00 - Displayed products are delivered from stock. Offers are valid within the limit of available stock.
EN 
Romana
Special Pliers
Most popular
Display: 1-21 from 26 products
Filters
Special Pliers
ENGINEER and KNIPEX pliers for extraction, circlips and live work
Special pliers bring together ENGINEER pliers for extracting damaged screws and KNIPEX pliers for circlips and live work. They are part of the hand tools category at Sanco Grup, are made in Japan (ENGINEER) and Germany (KNIPEX) and cover precision applications in mechanics, electronics, automotive and electrical installations.The ENGINEER extraction pliers have jaws with vertical and horizontal teeth that bite the head of damaged, rusted or worn-head screws firmly, for quick undoing without slipping. The KNIPEX circlip pliers mount and dismount internal or external circlips precisely, and the VDE-insulated pliers allow safe work on installations under voltage.
Available products
ENGINEER PZ-54 screw removal pliers, movable joint, 175 mm
ENGINEER PZ-54 pliers for extracting damaged-head screws, with a movable joint (adjustable jaw) that adapts to different screw-head sizes, 175 mm. The jaws with special teeth grip the damaged head firmly, for extraction without slipping. Made in Japan.ENGINEER PZ-61 Z Plus pliers, with cutting and crimping, 175 mm
ENGINEER PZ-61 Z Plus combined pliers for extracting damaged, rusted or worn-head screws (diameter 2 - 5.5 mm). Z Plus technology, with vertical and horizontal teeth for a firm grip from any angle. Includes an integrated cutter (cuts copper up to 1.2 mm in diameter) and a terminal crimping function (1.25 - 3.5 sq mm). Carbon steel (hardness approximately HRC 60), symmetric design for right or left hand, ergonomic anti-slip handles. Length approximately 175 mm, weight approximately 170 g. Made in Japan.ENGINEER PZ-59 pliers (RX Neji-Saurus), 204 mm
ENGINEER PZ-59 combined pliers (Neji-Saurus RX), 204 mm, green, for extracting broken, worn or rusted screws, with a head between 3 and 15 mm. Jaws with interlocking vertical and horizontal grooves and side cutting jaws that cut wire up to 3.2 mm. T-shaped forged handles, weight 300 g, made in Japan.KNIPEX 44 11 J2 pliers for internal circlips, 180 mm
KNIPEX 44 11 J2 high-precision pliers for internal circlips (safety rings) in bore holes, 180 mm. Used especially in the automotive industry, for mounting and dismounting internal safety or locking circlips, with precision tips that fit into the narrow grooves without deforming the ring.KNIPEX 98 62 01 plastic pliers, tested VDE 1000 V, 180 mm
KNIPEX 98 62 01 fibreglass-reinforced plastic pliers, tested VDE 1000 V, 180 mm, for live work in electrical installations. Full reinforced-plastic construction, which offers protection against electric shock up to 1000 V.Key features
Neji-Saurus extraction jaws
The ENGINEER pliers have vertical and horizontal teeth that bite the damaged screw head firmly, from any angle, without slipping.Precision for circlips
The KNIPEX 44 11 J2 pliers have precision-machined tips, which fit into the narrow grooves of circlips without deforming them.VDE 1000 V protection
The KNIPEX 98 62 01 pliers are tested VDE and offer protection against electric shock up to 1000 V, for live work.Premium manufacturing
The ENGINEER pliers are made in Japan, and the KNIPEX ones in Germany, from quality materials, with high precision and durability.Recommended applications
Car and mechanical repairs
Extracting damaged screws and mounting or dismounting circlips on axles and shafts, in automotive and mechanics.Electronics and service
Extracting small, broken or special screws, in laptop, phone and electronic board repairs.Electrical installations
Live work with the VDE-insulated pliers and preparing conductors with the models that cut and crimp.Industrial maintenance
Freeing seized screws and precision interventions in service and maintenance.Safety note
Only the KNIPEX 98 62 01 pliers, tested VDE 1000 V, are intended for work near live parts. The ENGINEER extraction pliers and the circlip pliers are not insulated and are not used for live work. Work on electrical installations must be carried out only by qualified personnel, with the equipment disconnected from the source where possible, and with insulated VDE-tested tools when working under voltage. The extraction pliers are not recommended for hardened or heat-treated steel screws.Advantages
- ENGINEER (extraction) and KNIPEX (circlips, VDE) pliers.
- Jaws with teeth that bite the damaged screw head firmly.
- Precision pliers for internal circlips.
- VDE 1000 V insulated pliers for live work.
- Models with integrated cutting and crimping.
- Made in Japan (ENGINEER) and Germany (KNIPEX).
- Available from stock, with fast delivery in Bucharest and across the country.
Related categories
See also pliers for circlips and hose clamps, Engineer pliers for extracting worn screws and the full range of hand tools.The Special Pliers category from Sanco Grup brings together ENGINEER screw removal pliers (PZ-54, PZ-61 Z Plus, PZ-59, made in Japan) and KNIPEX pliers (made in Germany): the high-precision 44 11 J2 pliers for internal circlips in bore holes (180 mm, automotive) and the fibreglass-reinforced plastic pliers 98 62 01, tested VDE 1000 V, for live work (180 mm). Only the VDE pliers are intended for live work; the extraction pliers are not used on hardened or heat-treated steel screws.
Frequently asked questions
What products does the category contain?
ENGINEER screw removal pliers (PZ-54, PZ-61 Z Plus, PZ-59) and KNIPEX pliers for circlips (44 11 J2) and for live work (98 62 01 VDE 1000 V).What does the KNIPEX 44 11 J2 do?
It precisely mounts and dismounts internal circlips (safety rings) in bore holes, used especially in the automotive industry, with tips that fit into the narrow grooves without deforming the ring.Which pliers are insulated for live work?
Only the KNIPEX 98 62 01 pliers, made of fibreglass-reinforced plastic, tested VDE, which offer protection up to 1000 V. The other pliers are not insulated.What extra does the ENGINEER PZ-61 Z Plus do?
Besides extracting screws (2-5.5 mm), it cuts copper (up to 1.2 mm) and crimps terminals (1.25-3.5 sq mm), being a versatile tool with a symmetric design.FAQ
Can the extraction pliers be used on hardened steel?
They are not recommended on hardened or heat-treated steel screws, which can wear the special teeth. They are ideal for rusted or damaged-head screws made of ordinary steel.
Where are they made?
The ENGINEER pliers are made in Japan, and the KNIPEX ones in Germany.
Are they available in stock?
Some are in stock, the rest on order, with fast delivery in Bucharest and across the country.
