Self-Adjusting Crimping Pliers for wire ferrules it has small dimensions and weight. The small opening of the handles makes it very easy to handle.
Due to the slightly curved shape of the pliers, the lever force increases and the pliers are operated with less effort. The ferrule crimping pliers have small dimensions and automatic self-adjustment at the time of use. These things make the user's work easier and allow safe, reliable and fast crimping.
In particular suitable for all twin end sleeves (ferrules) up to 2 x 6 mm² or 2 x AWG 8.
Automatically crimp end sleeves of between 0.08 mm² and 16.0 mm² correctly
Crimping errors are almost impossible –the right profile size automatically
For reasons of design, it was a challenge to cover the wide capacity range of 0.08 to 10.0 mm² + 16.0 mm² using just one pair of crimping pliers. The result is technically sophisticated and easy to use.
Knipex has applied for a patent for the design and operating principle of these crimping pliers.
Crimping of end sleeves (ferrules): self-adjusting and of course accurate
Accurate work is called for when crimping end sleeves (ferrules). Adjustment to the desired size of the end sleeves is automatic with the Knipex 97 53 04 crimping pliers. The user does not need to measure manual force when crimping because, thanks to the integral lock with release mechanism, the right amount of pressure automatically reaches the end sleeve. The pliers are optimally set (calibrated) in the factory.
Hand-friendly working, even with large conductor cross-sections up to 16 mm²
The transmission ratio of these crimping pliers has been well-designed and is therefore hand-friendly; it provides a comfortable grip width. A toggle lever effectively supports manual force.
This enables conductors with large cross-sections to be assembled well even in the case of extensive installations – also with twin end sleeves (ferrules) up to 2 x 6 mm² or 2 x AWG 8.
The conductors are reliably connected to the end sleeves using a square profile – in all designated sizes.
• Square-shaped crimping die;
• Ergonomically designed handles;
• Crimping mechanism with clicket calibrated from the factory;
• Reduces crimping energy by 50%;
• Precise crimping jaws;
The integral locking with self-adjusting mechanism ensures a high-quality crimping effect even in the case of repeated crimping;
Precise adjustment of the mechanism before delivery from the factory!
Product type: Pliers
Pliers type: Crimping
Terminal type: Pins, ferrules
Crimping capacity: 0.08 - 10/16 mm²
Number of crimping dies: 1
Material: carbon steel
Handles: multicomponent sleeves
Color of handles: Blue/Red
Length: 180 mm
Weight: 460 g
Package Contents: 1 x Cleste sertizare cu autoreglare pini terminali si ferule, acces lateral, 180 mm, KNIPEX 975304
Material: PVC,Crom Vanadiu
Overall length: 180mm
Maximum diameter: 16mm
The products found on the site www.sancogrup.ro are present and on public procurement SICAP platform, under the registration of the CPV concerned;
You have chosen a product or service from nooastra offer, you want to purchase and is not available in the SICAP? Contact us to publish;
Payment can be made by OP, before delivery at our treasury accounts in the 24-30 days of the month.
From the same category You could be interested of the following products