Summer schedule: Monday – Friday: 9.00 – 16.00 - Next day delivery for in stock products. Offers are valid within the limit of available stock.
EN 
Romana
![Combination Scissors → ENGINEER → PH-57 → Kevlar aramid and cables → JPEPH57 [1]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/foarfeca-multifunctionala-taiere-kevlar-engineer-ph-50-lama-crestata-170-mm-fabricat-in-japonia-copie-380717.jpg "Combination Scissors → ENGINEER → PH-57 → Kevlar aramid and cables → JPEPH57 [1]")
![Combination Scissors → ENGINEER → PH-57 → Kevlar aramid and cables → JPEPH57 [2]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/foarfeca-multifunctionala-taiere-kevlar-engineer-ph-50-lama-crestata-170-mm-fabricat-in-japonia-copie-008720.jpg "Combination Scissors → ENGINEER → PH-57 → Kevlar aramid and cables → JPEPH57 [2]")
![Combination Scissors → ENGINEER → PH-57 → Kevlar aramid and cables → JPEPH57 [3]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/foarfeca-multifunctionala-taiere-kevlar-engineer-ph-50-lama-crestata-170-mm-fabricat-in-japonia-copie-727623.jpg "Combination Scissors → ENGINEER → PH-57 → Kevlar aramid and cables → JPEPH57 [3]")
![Combination Scissors → ENGINEER → PH-57 → Kevlar aramid and cables → JPEPH57 [4]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/foarfeca-multifunctionala-taiere-kevlar-engineer-ph-50-lama-crestata-170-mm-fabricat-in-japonia-copie-421679.jpg "Combination Scissors → ENGINEER → PH-57 → Kevlar aramid and cables → JPEPH57 [4]")
![Combination Scissors → ENGINEER → PH-57 → Kevlar aramid and cables → JPEPH57 [5]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/foarfeca-multifunctionala-taiere-kevlar-engineer-ph-50-lama-crestata-170-mm-fabricat-in-japonia-copie-184114.jpg "Combination Scissors → ENGINEER → PH-57 → Kevlar aramid and cables → JPEPH57 [5]")
![Combination Scissors → ENGINEER → PH-57 → Kevlar aramid and cables → JPEPH57 [6]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/foarfeca-multifunctionala-taiere-kevlar-engineer-ph-50-lama-crestata-170-mm-fabricat-in-japonia-copie-833428.jpg "Combination Scissors → ENGINEER → PH-57 → Kevlar aramid and cables → JPEPH57 [6]")
![Combination Scissors → ENGINEER → PH-57 → Kevlar aramid and cables → JPEPH57 [7]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/foarfeca-multifunctionala-taiere-kevlar-engineer-ph-50-lama-crestata-170-mm-fabricat-in-japonia-copie-243875.jpg "Combination Scissors → ENGINEER → PH-57 → Kevlar aramid and cables → JPEPH57 [7]")
![Combination Scissors → ENGINEER → PH-57 → Kevlar aramid and cables → JPEPH57 [8]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/foarfeca-multifunctionala-taiere-kevlar-engineer-ph-50-lama-crestata-170-mm-fabricat-in-japonia-copie-705919.jpg "Combination Scissors → ENGINEER → PH-57 → Kevlar aramid and cables → JPEPH57 [8]")
![Combination Scissors → ENGINEER → PH-57 → Kevlar aramid and cables → JPEPH57 [9]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/foarfeca-multifunctionala-taiere-kevlar-engineer-ph-50-lama-crestata-170-mm-fabricat-in-japonia-copie-344968.jpg "Combination Scissors → ENGINEER → PH-57 → Kevlar aramid and cables → JPEPH57 [9]")
ENGINEER Combination Scissors with Serrated Blade for Cables and Various Materials, 210 mm, Made in Japan PH-57
2-in-1 scissors for Kevlar, aramid, cables and technical materials
- Fine micro-serrations for Kevlar/aramid fibres and slippery materials.
- U-shaped blade section for cables and rope.
- 3 mm stainless-steel blades, 58 mm blade length, HRC 56±2.
- 210 mm, 136 g, ABS + TPR handles.
- CAUTION! Do not use the micro-serrated section on copper or steel wire, as this can shorten blade life. Heat-treated or specially hardened wire is not suitable for cutting with PH-57 and may damage the blades.
- Finger pinch guard and ABS protective cap included.
PN: PH-57
Delivery date: 24-48 hours for in-stock items
Product Code:
JPEPH57
Do you need help?
0752.645.008
Alternative Products
- Description
- Characteristics
- SICAP (SEAP) Puchaising
- Reviews (5)
- FAQ
ENGINEER PH-57 Combination Scissors DP are professional 2-in-1 scissors for cutting difficult and slippery materials. They combine fine micro-serrations that grip aramid/Kevlar fibres and plastic materials with a large U-shaped cutting section that holds cables and rope during cutting.
The stainless-steel blades are 3 mm thick, with a 58 mm blade length and HRC 56±2 hardness. ABS and TPR handles provide a comfortable grip for demanding work, while the integrated finger pinch guard helps prevent fingers from being trapped between the handles. An ABS protective cap is included for transport and storage.
Fine 0.5 mm-pitch micro-serrations grip thin and slippery materials, while the large U-shaped section holds cables and rope for controlled cutting.
The micro-serrations are designed for aramid fibres, including Kevlar, as well as PP plate and other materials that tend to slip between conventional blades.
The 3 mm stainless-steel blades and ABS + TPR handles are designed for strong cutting performance and comfortable handling.
PH-57 is supplied with an ABS cap to protect the blades during transport and storage.
The micro-serrations grip fine technical fibres and reduce slipping during cutting.
The U-shaped section is suitable for VCT 4 × 2 mm² cable, 5C coaxial cable, Ø8 mm cotton-insulated cord and comparable materials within the manufacturer's stated limits.
Official reference capacities include Ø10 mm rope, 4 mm leather or cork, 1.2 mm PP plate, carpet, and nylon/aramid fibres.
CAUTION! Do not use the micro-serrated section on copper or steel wire, as this can shorten blade life. Heat-treated or specially hardened wire is not suitable for cutting with PH-57 and may damage the blades.
ENGINEER PH-57 is a professional 210 mm multipurpose cutting tool for technical materials and varied cutting jobs. Its 0.5 mm-pitch micro-serrations grip Kevlar/aramid fibres and slippery materials, while the U-shaped blade holds cables and rope. The stainless-steel blades are 3 mm thick and HRC 56±2. Official reference capacities include VCT 4 × 2 mm² cable, 5C coaxial cable, Ø8 mm cotton-insulated cord, Ø10 mm rope, 4 mm leather/cork and 1.2 mm PP plate. ABS + TPR handles, finger pinch guard and ABS protective cap included.
Yes. ENGINEER explicitly lists aramid fibres among the materials handled by the fine micro-serrated cutting section.
The large U-shaped section holds cables and rope and reduces the tendency of the material to slip away during cutting.
No. ENGINEER warns against using the micro-serrated section on copper or steel wire and states that heat-treated or specially hardened wire is not suitable.
The stainless-steel blades are 3 mm thick, with a 58 mm blade length and HRC 56±2 hardness. ABS and TPR handles provide a comfortable grip for demanding work, while the integrated finger pinch guard helps prevent fingers from being trapped between the handles. An ABS protective cap is included for transport and storage.
Main features
Two cutting geometries in one tool
Fine 0.5 mm-pitch micro-serrations grip thin and slippery materials, while the large U-shaped section holds cables and rope for controlled cutting.
For Kevlar, aramid and technical materials
The micro-serrations are designed for aramid fibres, including Kevlar, as well as PP plate and other materials that tend to slip between conventional blades.
Robust construction for demanding work
The 3 mm stainless-steel blades and ABS + TPR handles are designed for strong cutting performance and comfortable handling.
Protective cap included
PH-57 is supplied with an ABS cap to protect the blades during transport and storage.
Technical specifications
- Product code: PH-57
- Type: Combination Scissors DP / multipurpose scissors
- Overall length: 210 mm
- Blade length: 58 mm
- Blade thickness: 3 mm
- Handle width: 98 mm
- Blade hardness: HRC 56±2
- Weight: 136 g
- Blade material: special stainless cutlery steel
- Handle material: ABS + TPR / elastomer
- Cap material: ABS
- Colour: green
- Accessory: protective cap
Cutting capacities and recommended applications
Kevlar and aramid fibres
The micro-serrations grip fine technical fibres and reduce slipping during cutting.
Flexible cables and cords
The U-shaped section is suitable for VCT 4 × 2 mm² cable, 5C coaxial cable, Ø8 mm cotton-insulated cord and comparable materials within the manufacturer's stated limits.
Rope, leather and plastics
Official reference capacities include Ø10 mm rope, 4 mm leather or cork, 1.2 mm PP plate, carpet, and nylon/aramid fibres.
Usage note
CAUTION! Do not use the micro-serrated section on copper or steel wire, as this can shorten blade life. Heat-treated or specially hardened wire is not suitable for cutting with PH-57 and may damage the blades.
Advantages
- 2-in-1 design: micro-serrations plus U-shaped blade.
- Cuts Kevlar/aramid fibres and slippery technical materials.
- Heavy-duty 3 mm stainless-steel blades.
- ABS + TPR handles for comfort and control.
- Integrated finger pinch guard.
- ABS protective cap included.
- 210 mm overall length and 136 g weight.
ENGINEER PH-57 is a professional 210 mm multipurpose cutting tool for technical materials and varied cutting jobs. Its 0.5 mm-pitch micro-serrations grip Kevlar/aramid fibres and slippery materials, while the U-shaped blade holds cables and rope. The stainless-steel blades are 3 mm thick and HRC 56±2. Official reference capacities include VCT 4 × 2 mm² cable, 5C coaxial cable, Ø8 mm cotton-insulated cord, Ø10 mm rope, 4 mm leather/cork and 1.2 mm PP plate. ABS + TPR handles, finger pinch guard and ABS protective cap included.
Frequently asked questions
Can ENGINEER PH-57 cut Kevlar and aramid fibres?
Yes. ENGINEER explicitly lists aramid fibres among the materials handled by the fine micro-serrated cutting section.
What is the U-shaped blade section for?
The large U-shaped section holds cables and rope and reduces the tendency of the material to slip away during cutting.
Can PH-57 cut every type of wire?
No. ENGINEER warns against using the micro-serrated section on copper or steel wire and states that heat-treated or specially hardened wire is not suitable.Package Contents: Foarfecă multifuncțională ENGINEER cu lamă dințată pentru cabluri și materiale diverse, 210 mm, PH-57
Material: Otel special
Protection working under voltage: Nu
Color: Green
Tip Varf Foarfeca: Ascutit
Overall length: 210 mm
Weight: 0.136 kg
- The products found on the site www.sancogrup.ro are present and on public procurement SICAP platform, under the registration of the CPV concerned;
- You have chosen a product or service from nooastra offer, you want to purchase and is not available in the SICAP? Contact us to publish;
- Payment can be made by OP, before delivery at our treasury accounts in the 24-30 days of the month.
If you want to express your opinion about this product you can add a review.
Can ENGINEER PH-57 cut Kevlar and aramid fibres?
Yes. Its fine micro-serrations are designed for aramid fibres and other materials that tend to slip between conventional blades.
What is the U-shaped cutting section used for?
It holds cables and rope in the cutting area and reduces material slippage.
Which materials should not be cut with PH-57?
Heat-treated or specially hardened wire is not suitable. ENGINEER also warns against using the micro-serrated section on copper or steel wire.
Frequently bought together
ENGINEER Side Cutting Pliers with Screw Remover, 225 mm, Made in Japan PZ-78
ENGINEER ESD 35° Micro Cutter with Super-Fine Tips, 125 mm, Made in Japan NZ-12
WERA 3950/9 Hex-Plus Stainless L-key set 1.5-10 mm 9 pieces 05073544001
ENGINEER Shear Pliers with Screw Remover for Screw and Cable Cutting, 215 mm PZ-79
Others also bought
Marian Lupascu,
O foarfeca extraordinara!Taie orice:cauciuc,textil,plastic,conductori etc.O recomand cu mare drag.Cumparati-o acum cat are un pret bun pt ca nu o sa va para rau!Garantez cu
Replycapul!
Was this review useful?