Summer schedule: Monday – Friday: 9.00 – 16.00 - Next day delivery for in stock products. Offers are valid within the limit of available stock.
EN 
Romana
![Silicone Tubes → ENGINEER → SS-17 → for SS-02 and SS-03 → SS-17 [1]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/tuburi-siliconice-engineer-ss-16-pentru-aspirator-lipituri-enginner-ss-02-3-4557-23018012.jpg "Silicone Tubes → ENGINEER → SS-17 → for SS-02 and SS-03 → SS-17 [1]")
![Silicone Tubes → ENGINEER → SS-17 → for SS-02 and SS-03 → SS-17 [2]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/tuburi-siliconice-engineer-ss-16-pentru-aspirator-lipituri-enginner-ss-02-1-4557-43285212.jpg "Silicone Tubes → ENGINEER → SS-17 → for SS-02 and SS-03 → SS-17 [2]")
![Silicone Tubes → ENGINEER → SS-17 → for SS-02 and SS-03 → SS-17 [3]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/tuburi-siliconice-engineer-ss-16-pentru-aspirator-lipituri-enginner-ss-02-5-4557-12894175.jpg "Silicone Tubes → ENGINEER → SS-17 → for SS-02 and SS-03 → SS-17 [3]")
ENGINEER Replacement Silicone Tubes for Solder Suckers, 2 × 50 mm SS-17
Replacement silicone tubes for ENGINEER SS-02 and SS-03
- Set of 2 silicone tubes, 50 mm each.
- 3 mm outside diameter; 1.5 mm inside diameter.
- Cut to the required length and use as a nozzle.
- Cut the tube to the required length and fit the resulting section as the nozzle on a compatible solder sucker. Replace it when worn, deformed or no longer sealing effectively.
- Flexible silicone for close contact with the PCB.
- Official accessory for SS-02 and SS-03 solder suckers.
PN: SS-17
Delivery date: 24-48 hours for in-stock items
Product Code:
JPESS17
Do you need help?
0752.645.008
Alternative Products
- Description
- Characteristics
- SICAP (SEAP) Puchaising
- Reviews (0)
- FAQ
ENGINEER SS-17 is a set of two replacement silicone tubes for ENGINEER SS-02 and SS-03 solder suckers. The tube can be cut to the required length and used as a nozzle, allowing only the worn tip section to be replaced instead of the complete desoldering pump.
The flexible silicone conforms closely to the PCB around the solder joint, helping improve suction efficiency. The material offers high heat resistance and is intended for solder-removal work.
ENGINEER's official Japanese product page explicitly identifies SS-17 as silicone tubing for SS-02 and SS-03 solder suckers.
Each tube is 50 mm long and can be cut to create the required replacement nozzle section.
Flexible silicone conforms around the solder joint, helping the solder sucker remove molten solder more efficiently.
Only the worn silicone section needs to be replaced, without replacing the complete solder sucker.
Replacement of worn silicone nozzles on ENGINEER SS-02 and SS-03 solder suckers.
The flexible nozzle is useful for removing solder in confined spaces around connectors.
ENGINEER recommends the tubing for solder removal in narrow areas and on densely populated PCBs.
Cut the tube to the required length and fit the resulting section as the nozzle on a compatible solder sucker. Replace it when worn, deformed or no longer sealing effectively.
ENGINEER SS-17 is the replacement silicone tubing set for SS-02 and SS-03 solder suckers. The pack contains 2 tubes, each 50 mm long, with a 3 mm outside diameter and 1.5 mm inside diameter. The tube is cut to the required length and used as a nozzle. Flexible silicone conforms around the solder joint on the PCB, helping improve molten-solder suction. It is recommended for work around connectors, densely populated electronic boards and other confined areas. Replacing only the worn silicone section provides an economical way to maintain the desoldering pump.
Official compatibility is ENGINEER SS-02 and SS-03.
Each tube is 50 mm long, with a 3 mm outside diameter and 1.5 mm inside diameter.
Yes. ENGINEER specifies that the tubing can be cut and used as a nozzle.
The flexible silicone conforms closely to the PCB around the solder joint, helping improve suction efficiency. The material offers high heat resistance and is intended for solder-removal work.
Main features
Compatible with ENGINEER SS-02 and SS-03
ENGINEER's official Japanese product page explicitly identifies SS-17 as silicone tubing for SS-02 and SS-03 solder suckers.
Cut to length and use as a nozzle
Each tube is 50 mm long and can be cut to create the required replacement nozzle section.
Improved contact with the PCB
Flexible silicone conforms around the solder joint, helping the solder sucker remove molten solder more efficiently.
Economical tip replacement
Only the worn silicone section needs to be replaced, without replacing the complete solder sucker.
Technical specifications
- Manufacturer code: SS-17
- Contents: 2 tubes
- Length: 50 mm per tube
- Outside diameter: 3 mm
- Inside diameter: 1.5 mm
- Material: silicone
- Official compatibility: ENGINEER SS-02 and SS-03
Recommended applications
Solder sucker maintenance
Replacement of worn silicone nozzles on ENGINEER SS-02 and SS-03 solder suckers.
Desoldering around connectors
The flexible nozzle is useful for removing solder in confined spaces around connectors.
High-density electronic boards
ENGINEER recommends the tubing for solder removal in narrow areas and on densely populated PCBs.
Usage note
Cut the tube to the required length and fit the resulting section as the nozzle on a compatible solder sucker. Replace it when worn, deformed or no longer sealing effectively.
Advantages
- Original accessory for ENGINEER SS-02 and SS-03.
- Two 50 mm tubes per pack.
- Flexible silicone for close PCB contact.
- 3 mm outside diameter and 1.5 mm inside diameter.
- Can be cut to the required length.
- Economical replacement of only the worn nozzle section.
ENGINEER SS-17 is the replacement silicone tubing set for SS-02 and SS-03 solder suckers. The pack contains 2 tubes, each 50 mm long, with a 3 mm outside diameter and 1.5 mm inside diameter. The tube is cut to the required length and used as a nozzle. Flexible silicone conforms around the solder joint on the PCB, helping improve molten-solder suction. It is recommended for work around connectors, densely populated electronic boards and other confined areas. Replacing only the worn silicone section provides an economical way to maintain the desoldering pump.
Frequently asked questions
Which solder suckers are compatible with ENGINEER SS-17?
Official compatibility is ENGINEER SS-02 and SS-03.
What are the SS-17 tube dimensions?
Each tube is 50 mm long, with a 3 mm outside diameter and 1.5 mm inside diameter.
Can SS-17 tubing be cut to length?
Yes. ENGINEER specifies that the tubing can be cut and used as a nozzle.Material: Silicon
Color: Clear
- The products found on the site www.sancogrup.ro are present and on public procurement SICAP platform, under the registration of the CPV concerned;
- You have chosen a product or service from nooastra offer, you want to purchase and is not available in the SICAP? Contact us to publish;
- Payment can be made by OP, before delivery at our treasury accounts in the 24-30 days of the month.
If you want to express your opinion about this product you can add a review.
write a review
What is this product used for?
ENGINEER SS-17 silicone tubes compatible with SS-02 and SS-03 desoldering pumps.
What are its main advantages?
Professional accessories for solder removal, PCB repair, industrial maintenance, automation systems, electronics servicing and technical laboratory applications.
How many pieces are in the pack?
The pack contains 2 pieces.
Frequently bought together
ENGINEER Shear Pliers with Screw Remover for Screw and Cable Cutting, 215 mm PZ-79
Others also bought
ENGINEER Solder Sucker for Desoldering Electronic Components and PCB Repair SS-03
ENGINEER ESD 35° Micro Cutter with Super-Fine Tips, 125 mm, Made in Japan NZ-12
ENGINEER IC Extractor for 8-42 Pin DIP Packages with Locking Mechanism SS-08
