Summer schedule: Monday – Friday: 9.00 – 16.00 - Displayed products are delivered from stock. Offers are valid within the limit of available stock.
EN 
Romana
Home use and maintenance
Most popular
Rennsteig Automatic Center Punch 4 mm Adjustable Force 430230
Rennsteig Center Punch 5 mm Precision Drill Point Marking 4321200
Sorry, no products matched the keyword
- - double check the writing
- - try to find simple words
- - try a less specific search
- - you can narrow your search results
For more information please contact us at the phone number 0752.645.008
Home Use and Maintenance
German-quality Rennsteig tools for household work
Most jobs around the house do not call for complicated tools, but for tools that do exactly one thing well: a hole drilled precisely where you marked it, a gasket cut cleanly, a board prised off without wrecking everything around it. The category is part of the hand tools section at Sanco Grup.There are 6 Rennsteig tools, a German manufacturer specialized in striking and marking tools, grouped into three types: center punches, a hollow punch and demolition bars.
Products available
Rennsteig 430230 automatic center punch, 4 mm
Professional punch with automatic release and adjustable force. It needs no hammer: you press it against the surface and it releases the blow itself, which means you can mark while holding the workpiece with your other hand. See also the Rennsteig chisels and punches.Rennsteig 4321200 center punch, 5 mm
Punch for precise marking of the drilling point, with a 5 mm tip, for work on metal and hard materials.Rennsteig 4301200 center punch, 4 mm
Punch for precise marking of the drilling point, with a 4 mm tip, for finer work.Rennsteig 1400100 professional hollow punch, Ø 10 mm
Hollow punch with a conical cut, for cutting gaskets from rubber, pressed board, leather or cork. Diameter 10 mm.Rennsteig 2714002 demolition bar
Professional pry bar for demolition and dismantling, used for pulling nails, prising boards and lifting fixed elements.Rennsteig ULTIMAX 2756002 demolition bar
Professional ULTIMAX bar, the heavy-duty version in the range, for more demanding demolition work.What they are for around the house
Center punches, before drilling
A drill bit placed directly on metal slips and scars the surface. The punch makes a small dimple in which the bit seats itself, so the hole ends up exactly where you marked it. The automatic version helps when you hold the part with one hand.The hollow punch, for gaskets
When a tap, lid or pump gasket has dried out, you can cut a new one yourself from a rubber sheet, instead of hunting for the exact part. The conical cut gives a clean edge that seals.The bars, for dismantling
For breaking down pallets, pulling deeply driven nails, prising off skirting boards or panelling, without tearing the surrounding wood. See also the carpentry pliers.Main features
German Rennsteig quality
A manufacturer specialized in striking and marking tools, with consistent workmanship and steel treated for repeated impact.Automatic release, on the 430230 punch
A spring mechanism that releases the blow on pressure, without a hammer, with force adjustable to the material.Two punching sizes
A 4 mm tip for fine work and a 5 mm tip for marks on thicker metal.Conical cut on the hollow punch
The conical edge cuts the gasket cleanly, without crushing the material, which matters for sealing.Two bar versions
A standard model for everyday work and ULTIMAX for heavier demolition.Recommended applications
Home repairs
Replacing gaskets, dismantling and refitting fixed elements, precise drilling in metal.DIY and refurbishment
Fitting shelves and brackets, prising off skirting boards or panelling during renovations.Workshop and garage
Metalwork, preparing holes before threading, maintenance of small machinery. See also the screw extractors and accessories.Garden and outbuildings
Dismantling wooden structures, breaking down pallets, repairs to light constructions.Benefits
- Simple tools that solve concrete household problems
- Automatic punch, no hammer, with adjustable force
- Precise marking, the drill bit no longer slips
- Cut your own gaskets, without hunting for the original part
- Two bar versions, for light or heavy work
- Made by Rennsteig, German quality
- Treated steel, resistant to repeated impact
Related categories
See also the Rennsteig chisels and punches, the pliers, the screwdrivers, the tool kits and the rust removers.The home use and maintenance category from Sanco Grup includes 6 Rennsteig tools of German quality, for everyday household work. The range covers the 430230 automatic center punch of 4 mm, with automatic release and adjustable force, which marks without a hammer, the 4321200 (5 mm) and 4301200 (4 mm) center punches, for precise marking of the drilling point, the 1400100 professional hollow punch with a 10 mm diameter and conical cut, for cutting gaskets, as well as the 2714002 and ULTIMAX 2756002 demolition bars, for pulling nails, prying boards and dismantling. They suit home repairs, DIY and refurbishment, workshop and garage work, garden and outbuildings.
Frequently asked questions
What does the category contain?
Six Rennsteig tools: an automatic center punch, two center punches, a hollow punch and two demolition bars.What is a center punch for?
For marking the drilling point: it makes a dimple in which the drill bit seats, so it does not slip across the surface.What is special about the automatic punch?
It has automatic release and adjustable force, so you need no hammer and can hold the part with your other hand.What is the hollow punch for?
For cutting round gaskets from rubber, pressed board, leather or cork, at a diameter of 10 mm
FAQ
What is the difference between the two bars?
The 2714002 model is for everyday work, while ULTIMAX 2756002 is the heavy-duty version, for more demanding demolition.
What brand are they?
Rennsteig, a German manufacturer specialized in striking and marking tools.
Are they suitable for professional use too?
Yes, they are professional tools, listed here for their household uses.
Special offers
