Summer schedule: Monday – Friday: 9.00 – 16.00 - Next day delivery for in stock products. Offers are valid within the limit of available stock.
EN 
Romana
![ENGINEER PZ-59 Screw Removal Pliers [1]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/screw-removal-pliers-rx-pz-59-engineer-204-mm-made-in-japan-3654-5961.jpg "ENGINEER PZ-59 Screw Removal Pliers [1]")
![ENGINEER PZ-59 Screw Removal Pliers [2]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/super-advanced-combination-pliers-engineer-pz-78-with-screw-remover-3654-7681.jpg "ENGINEER PZ-59 Screw Removal Pliers [2]")
![ENGINEER PZ-59 Screw Removal Pliers [3]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/screw-removal-pliers-rx-pz-59-engineer-204-mm-made-in-japan-3654-7976.jpg "ENGINEER PZ-59 Screw Removal Pliers [3]")
![ENGINEER PZ-59 Screw Removal Pliers [4]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/screw-removal-pliers-rx-pz-59-engineer-204-mm-made-in-japan-3654-6603.jpg "ENGINEER PZ-59 Screw Removal Pliers [4]")
![ENGINEER PZ-59 Screw Removal Pliers [5]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/super-advanced-combination-pliers-engineer-pz-78-with-screw-remover-3654-4321.jpg "ENGINEER PZ-59 Screw Removal Pliers [5]")
![ENGINEER PZ-59 Screw Removal Pliers [6]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/screw-removal-pliers-rx-pz-59-engineer-204-mm-made-in-japan-3654-4561.jpg "ENGINEER PZ-59 Screw Removal Pliers [6]")
![ENGINEER PZ-59 Screw Removal Pliers [7]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/screw-removal-pliers-rx-pz-59-engineer-204-mm-made-in-japan-3654-4997.jpg "ENGINEER PZ-59 Screw Removal Pliers [7]")
![ENGINEER PZ-59 Screw Removal Pliers [8]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/super-advanced-combination-pliers-engineer-pz-78-with-screw-remover-3654-5200.jpg "ENGINEER PZ-59 Screw Removal Pliers [8]")
![ENGINEER PZ-59 Screw Removal Pliers [9]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/super-advanced-combination-pliers-engineer-pz-78-with-screw-remover-3654-9412.jpg "ENGINEER PZ-59 Screw Removal Pliers [9]")
![ENGINEER PZ-59 Screw Removal Pliers [10]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/super-advanced-combination-pliers-engineer-pz-78-with-screw-remover-3654-7476.jpg "ENGINEER PZ-59 Screw Removal Pliers [10]")
![ENGINEER PZ-59 Screw Removal Pliers [11]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/super-advanced-combination-pliers-engineer-pz-78-with-screw-remover-3654-8936.jpg "ENGINEER PZ-59 Screw Removal Pliers [11]")
![ENGINEER PZ-59 Screw Removal Pliers [12]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/super-advanced-combination-pliers-engineer-pz-78-with-screw-remover-3654-5645.jpg "ENGINEER PZ-59 Screw Removal Pliers [12]")
![ENGINEER PZ-59 Screw Removal Pliers [13]](https://gomagcdn.ro/domains/sancogrup.ro/files/product/original/screw-removal-pliers-rx-pz-59-engineer-204-mm-made-in-japan-3654-1023.jpg "ENGINEER PZ-59 Screw Removal Pliers [13]")
ENGINEER Heavy Duty Screw Removal Pliers for Damaged and Seized Screws, 200 mm, Made in Japan PZ-59
Removes the screws no screwdriver can undo any more
- Removes screws with a damaged, stripped or rusted head, in seconds.
- Interlocking teeth: a secure grip without slipping, even on rounded heads.
- Extracts screw heads Ø3-15 mm and cuts steel wire up to Ø3.2 mm.
- Also grips square and hexagonal nuts.
- T-shaped handles with rubber sleeve, ergonomic and non-slip.
- Carbon steel, robust yet light: 204 mm, just 300 g.
- Act on the screw head, not the thread. Not for heat-treated, welded screws or steel wire.
- Made in Japan, recommended by AREL.
PN: PZ-59
Delivery date: 24-48 hours for in-stock items
Product Code:
JPEPZ59
Do you need help?
0752.645.008
Alternative Products
- Description
- Characteristics
- Video (1)
- SICAP (SEAP) Puchaising
- Reviews (65)
- FAQ
The ENGINEER Neji-Saurus RX PZ-59 screw extraction pliers is the 200 mm tool that removes the screws no screwdriver can undo any more: screws with a damaged, broken, rusted head or a stripped drive. The jaws with vertical and horizontal teeth grip the screw head firmly and turn it, even when the cross or drive is completely destroyed. It is made in Japan and is recommended by the Romanian Association of Electricians (AREL).
Unlike an ordinary combination plier, where the teeth meet tip to tip and slip, the PZ-59 has interlocking teeth, so it grips securely even a very thin plate, without slipping. It removes screws with damaged or rusted heads, or seized fasteners, in seconds – much faster than any other extractor and much simpler than a universal plier.
The T-shaped forged handles provide superior grip strength, and the rubber sleeve does not twist or slip during intensive use. Inside, the PZ-59 has a special gripping area for square and hexagonal screw heads or nuts, and the side cutting jaws cut steel wire up to 3.2 mm in diameter.
The body is made entirely of carbon steel, it extracts screw heads from 3 to 15 mm in diameter and is intended especially for professionals: car mechanics, builders, installers and DIY enthusiasts. At 204 mm long, 56 mm wide and just 300 g, the PZ-59 is powerful yet easy to handle.
CAUTION! Always act on the screw head, not on the thread. The PZ-59 cannot remove screws tightened with powerful tools, heat-treated or welded, and is not intended for hard wood screws or steel wire – these can damage the teeth and jaws. The product is not corrosion-protected; oil it periodically to keep it in good condition.
Product compliance information
Unlike an ordinary combination plier, where the teeth meet tip to tip and slip, the PZ-59 has interlocking teeth, so it grips securely even a very thin plate, without slipping. It removes screws with damaged or rusted heads, or seized fasteners, in seconds – much faster than any other extractor and much simpler than a universal plier.
The T-shaped forged handles provide superior grip strength, and the rubber sleeve does not twist or slip during intensive use. Inside, the PZ-59 has a special gripping area for square and hexagonal screw heads or nuts, and the side cutting jaws cut steel wire up to 3.2 mm in diameter.
The body is made entirely of carbon steel, it extracts screw heads from 3 to 15 mm in diameter and is intended especially for professionals: car mechanics, builders, installers and DIY enthusiasts. At 204 mm long, 56 mm wide and just 300 g, the PZ-59 is powerful yet easy to handle.
Main features
Removes damaged and rusted screws
Grips the screw head from the outside and turns it, removing screws with a broken, rusted head or a completely stripped drive, in seconds.Interlocking teeth
The teeth don't meet tip to tip, they interlock, for a secure grip without slipping, even on rounded heads or a very thin plate.T-shaped forged handles
The T-section provides superior grip strength, and the rubber sleeve does not twist or slip during intensive use.Nut gripping and wire cutting
The inner area grips square and hexagonal screw heads or nuts, and the side jaws cut steel wire up to Ø3.2 mm.Carbon steel, easy to handle
Body made entirely of carbon steel, robust yet light (just 300 g), green so it's easy to find in the toolbox.Technical specifications
- Product code (SKU): PZ-59
- Brand: ENGINEER (Neji-Saurus RX)
- Type: screw extraction pliers (combination pliers)
- Extractable screw head diameter: Ø3-15 mm
- Cutting capacity: steel wire up to Ø3.2 mm
- Total length: 204 mm
- Width: 56 mm
- Weight: 300 g
- Material: carbon steel
- Colour: green
- Live-working protection: no
- Made in Japan!
Recommended applications
Car and motorcycle service
Removing seized, rusted or rounded-head screws in car, motorcycle and machinery repairs.Construction and installations
Removing large, damaged or seized screws in construction and installation work.Maintenance and workshop
Fast work on equipment and machinery, where seized screws or square and hexagonal nuts appear.DIY
Home and hobby projects where you meet damaged screw heads that a screwdriver can no longer grip.Usage note
CAUTION! Always act on the screw head, not on the thread. The PZ-59 cannot remove screws tightened with powerful tools, heat-treated or welded, and is not intended for hard wood screws or steel wire – these can damage the teeth and jaws. The product is not corrosion-protected; oil it periodically to keep it in good condition.
Advantages
- Removes screws with a damaged, broken or rusted head, in seconds.
- Interlocking teeth, for a secure grip without slipping.
- Extracts screw heads Ø3-15 mm and cuts steel wire up to Ø3.2 mm.
- T-shaped handles with rubber sleeve, ergonomic and non-slip.
- Also grips square and hexagonal nuts.
- Carbon steel, robust yet light: 204 mm, just 300 g.
- Made in Japan, recommended by AREL.
- Over 60 reviews, valued by mechanics and professionals.
The ENGINEER Neji-Saurus RX PZ-59 screw extraction pliers from Sanco Grup is a 204 mm tool made in Japan, recommended by the Romanian Association of Electricians, for removing screws with a damaged, broken, rusted head or a stripped drive. The interlocking teeth grip the screw head securely, without slipping, and the inner area grips square and hexagonal nuts. It extracts screw heads from 3 to 15 mm in diameter and cuts steel wire up to Ø3.2 mm. The T-shaped forged handles, with a rubber sleeve, are ergonomic and non-slip. Carbon steel body, length 204 mm, width 56 mm, weight 300 g. Ideal for car mechanics, builders, installers and DIY. Not for use on heat-treated, welded screws or steel wire.
Frequently asked questions
How does the PZ-59 remove a screw with a stripped head?
It grips the screw head from the outside with its interlocking teeth and turns it, working even when the drive (Phillips, slotted, hex) is completely stripped.Which screw head diameters does it extract?
Screw heads from 3 to 15 mm in diameter. In addition, it cuts steel wire up to Ø3.2 mm.Can it undo hard wood screws?
It is not recommended on very hard, heat-treated or welded screws, or on hard black steel wood screws, these can damage the jaw teeth. The PZ-59 is ideal for screws made of ordinary materials.Material: Otel carbon
Cutting head width: 56mm
Length of cut: Nu
Maximum diameter: 3.2mm
Protection working under voltage: Nu
Package Contents: Cleste patent combinat ENGINEER PZ-59,extragere suruburi rupte,200mm,taie Ø3 2mm,300g,verde,fabricat Japonia
Produced: Made in Japan
Color: Green
Overall length: 204 mm
- The products found on the site www.sancogrup.ro are present and on public procurement SICAP platform, under the registration of the CPV concerned;
- You have chosen a product or service from nooastra offer, you want to purchase and is not available in the SICAP? Contact us to publish;
- Payment can be made by OP, before delivery at our treasury accounts in the 24-30 days of the month.
How do you use the PZ-59 correctly?
Grip the screw head between the jaws, as close to the base as possible, clamp firmly and turn. Always act on the screw head, not on the thread, for a secure grip and to protect the teeth.
How is it different from the other PZ models?
The PZ-59 is the large, 200 mm model, for large screws (head Ø3-15 mm). For small electronics screws there is the PZ-57, and for tight spaces, the long-nose PZ-60 model.
Does it need maintenance?
Yes. The PZ-59 is not corrosion-protected, so periodic oiling (for example with a light oil) is recommended, to keep it in good condition and prevent rust.
Frequently bought together
ENGINEER Side Cutting Pliers with Elastomer Grips, 210 mm, Made in Japan PD-08
ENGINEER Shear Pliers with Screw Remover for Screw and Cable Cutting, 215 mm PZ-79
Others also bought
Eduard Bordeiu,
Scule de calitate.
ReplyWas this review useful?