Universal crimping connectors pliers Engineer PA-09, 175 mm, for over 100 different connectors
-13%
Universal crimping connectors pliers Engineer PA-09, 175 mm, for over 100 different connectors
289,47
Lei
251,83
Lei
Universal
crimping
connectors pliers
Engineer
PA-09
●With 1 pair of our Connector Pliers, you can crimp in tidy finishing open-barrel connectors such as MOLEX, TE (Tyco), JST, HRS, etc; ●Ideal for 1.25mm pitch and 2.5mm pitch micro connectors or D-sub connectors (#32 - #20 AWG wires); ●D-Sub connector contact can be also crimped; ●4-different cavities of elaborate dies (1.0, 1.4, 1.6, 1.9 mm); ●Original joint screw prevents the joint from being loose and offers you easy maintenance; ●With locking latch and coiled spring; ● Oil resistant Elastomer (TPR) handle;. ● The images are for presentation purposes only.
PN:
PA-09
In stock
Delivery date:
24 h - 48 h from order confirmation
Universal crimping connectors pliers Engineer PA-09, Ideal for 1.25mm pitch and 2.5mm pitch micro connectors or D-sub connectors (#32 - #20 AWG wires)
How to select the right crimping molds
1. Measure the diameter of the conductor or the diameter of the cable with insulation with a subler, making sure that the connectors of the connector are parallel. 2. Select the die width that is close to the measured connector lug width. Example: 1.5 mm measured - >> Select 1.6 mm molds 3. Conductor crimping First crimp the conductor. It is recommended to offset the front of the conductor connector by 0.1 - 0.2 mm. Then crimp the cable with insulation.