Summer schedule: Monday – Friday: 9.00 – 16.00 - Displayed products are delivered from stock. Offers are valid within the limit of available stock.
EN 
Romana
Aimo Compatible Dymo Industrial Heat-Shrink Tubes
Most popular
Display: 1-5 from 5 products
FiltersCompatible Heat-Shrink Tubes for DYMO
DYMO-compatible polyolefin heat-shrink tubes
AIMO DYMO-compatible heat-shrink tubes are industrial polyolefin tubes, an affordable alternative to original DYMO Rhino ID1, for cable identification and protection, at a lower cost.They are not self-adhesive: they are slid onto the cable and shrunk with heat, at a 3:1 ratio. They are available in 6, 9, 12, 19 and 24 mm widths, in 1.5 m rolls, in black on white and black on yellow, and are printed by thermal transfer, with no ink, using DYMO industrial printers.
Printer compatibility
- Dymo Rhino 4200, 5200 and 6000
- DYMO LabelManager 500TS
- DYMO LabelWriter 400 Duo and 450 Duo
How to apply
- Print the tube and cut the required length.
- Slide the tube onto the cable before connection and position it.
- Apply hot air until the tube shrinks completely (3:1 ratio).
- The tube fixes permanently, protecting and marking the conductor.
Available options
Black on white
For general cable identification, in telecom, networks and fiber optics.Black on yellow
For warning and highlighting, in electrical panels and risk zones.Sizes
Widths of 6, 9, 12, 19 and 24 mm, in 1.5 m rolls.Why choose the AIMO-compatible version
Compatible tubes offer the same sizes and similar performance, at a more accessible price, for large volumes.Recommended applications
Cables and electrical panels
Marking cables and wires in electrical panels and automation.Data centers and networks
Labeling connections in servers, racks and IT infrastructure.Telecom and security
Identifying wiring in telecom, fiber optics, security and Pro AV.Automotive and maintenance
Organizing wires in electrical systems and re-labeling work.Benefits
- Dual role: identification and protection of cables
- Permanent fit through heat shrinking, 3:1 ratio
- Polyolefin resistant to -55°C…+135°C, moisture, oils and abrasion
- Thermal-transfer printing, with no ink
- Affordable alternative, good value for large volumes
- Available from stock, with fast delivery
Related industrial categories
See also the main heat-shrink tubes category, the flexible nylon labels, and the industrial printers.AIMO DYMO-compatible heat-shrink tubes from Sanco Grup are polyolefin tubes, an affordable alternative to original DYMO Rhino ID1, 6, 9, 12, 19 and 24 mm wide, in 1.5 m rolls, 3:1 ratio, in black on white and black on yellow. Compatible with DYMO Rhino 4200/5200/6000 (not 6000+), LabelManager 500TS and LabelWriter 400/450 Duo. They shrink permanently onto the cable with heat and resist -55°C…+135°C, moisture, oils and abrasion.
Frequently asked questions
Do they stick to the cable?
No. They shrink onto the cable when heat is applied, providing a permanent fit, with no adhesive.How are they applied?
They are slid onto the cable before connection, then heated until they shrink completely (3:1 ratio).What widths and lengths are there?
Widths of 6, 9, 12, 19 and 24 mm, in 1.5 m rolls.What colors are available?
Black on white and black on yellow.Which printers are they printed with?
With DYMO Rhino 4200/5200/6000, LabelManager 500TS and LabelWriter 400/450 Duo (not the Rhino 6000+).Do they work with the Rhino 6000+?
No. The Rhino 6000+ only accepts original DYMO consumables.FAQ
What temperatures do they withstand?
They withstand temperatures between -55°C and +135°C.
What is the difference from original DYMO tubes?
They are a more affordable AIMO alternative, with the same sizes and similar performance, but without Rhino 6000+ support.
Are they available from stock?
Yes, with fast delivery.
