Displayed products are delivered from stock. Offers are valid within the limit of available stock.

ENGINEER Engineer PA-14 high-precision stripper pliers, thin, solid or braided cables and wires, Made in Japan

155,79 Lei 140,21 Lei

Engineer PA-14 


stripper pliers 

thin, solid or braided

cables and wires, 

Made in Japan

  • Very round finish of the threads after cutting due to sharp and precise edges
  • Made of abrasion resistant carbon steel alloy
  • It does not damage the central threads
  • Suitable for both solid and braided wires
  • Oil resistant elastomer (TPR) handle
  • Handle provided with strap fastening lug
  • Made in Japan
  • The images are for presentation purposes only.


PN: PA-14

In stock

Delivery date: 24 h - 48 h from order confirmation

Stock limit
Add to cart
Product Code: JPEPA14 Do you need help? 0752.645.003 / 0752.645.008
Add to wishlist Request information
  • Description
  • Characteristics
  • SICAP (SEAP) Puchaising
  • Reviews (0)
Engineer PA-14 high-precision stripper pliers designed to remove insulation from the ends of cables or wires. This operation allows you to expose the conductor under the insulation to make connections or for other purposes.

Engineer PA-14 pliers have special edges to cut and remove insulation without damaging the conductor.
When cutting wire or cable, it is important to use the appropriate pliers for the diameter and type of cable or wire you are cutting.


Sancogrup Engineer
The original "ENGINEER" joint screw is very convenient for easy maintenance.

Sancogrup Engineer
Precise long-lasting cutter thanks to elaborately sharpened edges and anti-corrosion carbon steel material.

Sancogrup Engineer
Handles with belt hole to prevent accidental fall. It is still a very precise tool.

How to adjust the joint screw

Sancogrup Engineer
(1)    When the joint screw loosens, the stripping work becomes cumbersome.  (2)    Hold the hex bolt (opposite side) with a wrench.  (3) Tighten the joint screw with a hex wrench. (Torque less than 2 N/m)


Sancogrup Engineer

Do not attempt to adjust the bolt with nut on both sides with 2 wrenches. This can cause the bolt joint to break. Use a hex key for fastening with a torque of less than 2 N/m!!!
See below the table with the technical specifications of the Engineer PA-14 pliers

Stripper's Hole Diameter 0.25 0.3 0.4 0.5 0.65 0.8 0.95
Stranded 34 32 30 28 26 24 22
Solid wire 32 30 28 26 24 22 20

When using wire stripping and cutting pliers, we recommend that you observe the following safety tips:

Always wear safety glasses to protect your eyes from particles or fragments that may fly during cutting or stripping.

Make sure the pliers are in good working order and are kept clean and sharp.

Always follow the manufacturer's recommendations regarding the use and maintenance of pliers.

Work in a well-lit environment and make sure you have enough pressure on the pliers to cut or strip effectively, but not too much pressure to damage the conductor.

Do not work with live cables or wires without proper training and protective equipment. Handling live cables can be extremely dangerous and should only be done by qualified personnel.

  • Package Contents: 1 x PA-14 Engineer Pliers
  • Material: Elastomer, Special alloy steel
  • Total length: 175 mm
  • Protection working under voltage: No
  • Green colour
  • Origin: Made in Japan
  • Brand: Engineer
  • Dimensions: 190 x 80 x 30 mm
  • Weight: 135 g

Package Contents: 1 x Cleste taiere si dezizolator de inalta precizie Engineer PA-07, cabluri si fire subtiri, pline sau litate, Fabricat in Japonia

Material: Otel carbon, Elastomer

Protection working under voltage: Nu

Produced: Made in Japan

Overall length: 175 mm

  • The products found on the site www.sancogrup.ro are present and on public procurement SICAP platform, under the registration of the CPV concerned;
  • You have chosen a product or service from nooastra offer, you want to purchase and is not available in the SICAP? Contact us to publish;
  • Payment can be made by OP, before delivery at our treasury accounts in the 24-30 days of the month.

If you want to express your opinion about this product you can add a review.

The review was sent successfully.

Customer Support Monday - Thursday 9:00 - 16:00
Friday 9:00 - 15:30

0752.645.003 0752.645.008 office@sancogrup.ro

Compara produse

You must add at least one product to compare products.

Was added to wishlist!

Was removed from wishlist!

partener sanco grup
incredere sanco grup